industrial

SCREENS

  • YKR-H/SK SERIES CIRCULAR SCREEN
  • ZKR SERIES LINEAR SCREEN

  • NJ EXCITER SERIES SCREEN

  • YKR/ZKR-NJ SERIES SCREEN

  • MOS SERIES SCREEN

  • TSK SERIES TRIPLE SHAFT SCREEN

YKR-H/SK SERIES CIRCULAR SCREEN

General Info

Circular Screen is suitable for various screening conditions of stone , metallurgy , metal mining ,coal etc., YKR-H with feeding size less than 300mm and separation size between 2~150mm; YKR-SK with feeding size less than 250mm and separation size between 2~76mm.

ZKR SERIES LINEAR SCREEN

General Info

ZKR heavy linear motion screens are recommended for applications of high load, heavy tough operations in metallurgy, metal mine, coal and aggregate for separation, dewatering and refining with feed top-size 50mm; Screening media matched includes stainless steel mesh and polyurethane panel.

TSK SERIES TRIPLE SHAFT SCREEN

General Info

TSK series triple shaft screen is powered of 6 sets of NJ exciters with elliptical motion, which can be used in screening of big, medium and small size materials. The screen operates smoothly due to the lower and horizontal mounting, which can be used in different wet or dry screening applications with the mounting height limit.

TSK triple shaft screen is widely used in various screening of metallurgy, mining, construction, road and hydro power material. It is also the ideal option for the mobile screening machine.

NJ EXCITER SERIES SCREEN

General Info

For higher screening performance or easier exciter installation, YKR/ZKR-NJ, BS or TSK screen can be equipped with NJ exciters.

NJ exciter uses SKF or FAG bearing, so that higher screening performance and longer endurance can be obtained.

  • Real cartridge design

This encapsulated design creates a no-bearing change-out environment. It is a true cartridge that is capable of being removed and a new unit installed within one hour, drastically reducing costs.

  • Longer bearing life

4 sets of bearings can provide higher load bearing and longer service life than the eccentric shaft double bearing vibrator, and the excitation force generate by the eccentric blocks passes through the thickness center of the side plate, and the stress state of the side plate is more ideal.

  • Easy Stroke Adjustment

The lightweight aluminum end cap is easily removed by hand for a quick stroke adjustment. The NJ allows the NJ serial screens to be adjusted to fit any application.

  • Grease Lubrication System

All the bearings are lubricated by grease with special labyrinth seals which are workable to avoid leakage or contamination. An automatic lubrication appliance could be optional for some operation requirement according to customer demand.

MOS ADVANCED SERIES SCREEN

General Info

MOS series screens make use of the principle of self-synchronous elliptical motion screening is adopted, it is different from the traditional two axis or three-axis gear forcing synchronous ellipse vibrating screen, the screening concept is more advanced.

The upper and lower vibrators are staggered back and forth, There is plenty of room for maintenance. Its unique structure makes it more suitable for condition of large amount of fine particles in the material, the results showed that the treatment effect was significant. 

YKR/ZKR-NJ SERIES SCREEN

General Info

YKR/ZKR-NJ series heavy screens are recommended for applications of high load, heavy tough applications in metallurgy, metal mine, coal etc.

With feeding size less than 300mm, and separation size ranging from 3 to 150 mm, while ZKR-NJ heavy linear motion screen can process the max feeding size less than 50mm with separation size ranging from 0.25~50mm;

Get In touCh

Get a Free Estimate Or Make an Appointment 

587.215.6231

info@starbridge.ca

Monday-Friday

8:00 AM-5:00PM

6 + 3 =